Description
Advantages
- Plug & Play: Safety Simplifier units with matching safety door protection for each door and with prepared EPlan macros, makes planning and design easier
- Flexible safety concept without safety controller in the control cabinet, which must be wired and planned
- Easily expandable for up to 15 doors
- In retrofit systems, modern door switches with RFID can replace existing doors with 3 safety switches
- Easy maintenance and commissioning with the free software Simplifier Manager
EUROMAP 73 requires three safety switches per safety door. A plausibility check during opening and closing of the door is used to check for manipulation of the safety functions. Only one safety door with three safety switches can be connected to a EUROMAP 73 interface.
If further accesses to a plant are required, additional EUROMAP 73 interfaces are needed from the manufacturer of the plant, or a safety controller is installed in a control cabinet. If a safety controller is used, the safety function of several doors is connected to the injection molding system with a contact extension in the control cabinet (3 NO contacts and 3 NC contacts).
Read moreAdvantages
- Plug & Play: Safety Simplifier units with matching safety door protection for each door and with prepared EPlan macros, makes planning and design easier
- Flexible safety concept without safety controller in the control cabinet, which must be wired and planned
- Easily expandable for up to 15 doors
- In retrofit systems, modern door switches with RFID can replace existing doors with 3 safety switches
- Easy maintenance and commissioning with the free software Simplifier Manager
EUROMAP 73 requires three safety switches per safety door. A plausibility check during opening and closing of the door is used to check for manipulation of the safety functions. Only one safety door with three safety switches can be connected to a EUROMAP 73 interface.
If further accesses to a plant are required, additional EUROMAP 73 interfaces are needed from the manufacturer of the plant, or a safety controller is installed in a control cabinet. If a safety controller is used, the safety function of several doors is connected to the injection molding system with a contact extension in the control cabinet (3 NO contacts and 3 NC contacts).
With Safety Simplifier
A Safety Simplifier on an injection molding machine with integrated EUROMAP 73 interface is a simple and flexible solution. Up to 15 external doors and operational units can be wirelessly connected and integrated with the injection molding machine. This means no additional control cabinet and no additional safety controller in the control cabinet and significantly less wiring effort.
Existing doors with 3 safety switches or doors with state-of-the-art, highly coded RFID actuators can be individually networked with a Safety Simplifier with EUROMAP 73 interface.
The Safety Simplifier is not only the ideal solution for large plants, but is often the most economical solution from the very first door, since a separate evaluation in the control cabinet is not necessary. Safety functions, material transport, rear step protection by means of safety laser scanners, safety light curtains, safety mats or pre-reset buttons can be easily integrated.
The Safety Simplifier helps to bring older systems up to the latest safety standards and considerably simplifies the integration.