Description
Advantages
- Safety outputs pin a7 and b7 are only switched on after confirmation of the safety switches
- Connection of up to 15 doors to one EUROMAP interface
- Wireless communication for fast, wiring-reduced commissioning
- No need to use additional safety controllers
- Emergency stop functions can switch off further peripheral systems via the wireless interface
- Unproblematic plant expansion using additional safety doors is possible in a short period of time
The EUROMAP 78 defines the connection between an injection molding machine and an external safety device. It requires a two-channel safe signal (OSSD) according to the specified performance level, which can be provided by a safety switch and/or a safety controller.
The safety signals at pins a7 and b7 of the EUROMAP 78 may only switch on when the safety device is closed, locked and confirmed.
Only one safety switch/emergency stop button can be connected directly to a EUROMAP 78 interface at a time. If more safety doors are required, an additional interface must be requested from the manufacturer of the injection molding machine or an additional safety controller in an external control cabinet takes over the connection of several safety doors to one EUROMAP 78 interface.
Read moreAdvantages
- Safety outputs pin a7 and b7 are only switched on after confirmation of the safety switches
- Connection of up to 15 doors to one EUROMAP interface
- Wireless communication for fast, wiring-reduced commissioning
- No need to use additional safety controllers
- Emergency stop functions can switch off further peripheral systems via the wireless interface
- Unproblematic plant expansion using additional safety doors is possible in a short period of time
The EUROMAP 78 defines the connection between an injection molding machine and an external safety device. It requires a two-channel safe signal (OSSD) according to the specified performance level, which can be provided by a safety switch and/or a safety controller.
The safety signals at pins a7 and b7 of the EUROMAP 78 may only switch on when the safety device is closed, locked and confirmed.
Only one safety switch/emergency stop button can be connected directly to a EUROMAP 78 interface at a time. If more safety doors are required, an additional interface must be requested from the manufacturer of the injection molding machine or an additional safety controller in an external control cabinet takes over the connection of several safety doors to one EUROMAP 78 interface.
With Safety Simplifier
Safety switches, process locks or RFID sensors can be easily connected to a Safety Simplifier via an M12 plug. This is mounted directly on the safety gate.
Thanks to secure wireless or CAN communication, up to 15 safety gates can be connected to one EUROMAP 78 interface with the Safety Simplifier. The EUROMAP Safety Simplifier is connected directly to the injection molding machine via a fixed cable with Harting plug.
Safety functions such as emergency stop, door request or reset are implemented directly in the Safety Simplifier and can be configured in the Simplifier Manager software without any programming knowledge. Thanks to ready-to-use functional modules and prescribed programs, the programming of the safety controller is quick and easy.
The safe OSSD outputs are only enabled after all doors have been closed, held shut and acknowledged.
