Gatebox, Wireless & CAN (2 PB’s, Key selector)

Safety Simplifier PLC with prewired E-stop, two Push Buttons and Key selector. Two connections for safety sensors and/or machines.

A safety PLC with prewired E-stop and two Push Buttons for optional use. It comes with 6 different colour caps wich gives you the free option. The caps are easily clicked on the PB:s. The indication of the Push Button is done by the same I/O as for the input. You can select fixed and/or flashing light. This model is intended for a safety solution for a single machine or for a combination of several machines and safety devices.

-This unit has free safety I/O for safety devices and for machines which make it easy make a safety system which fulfill the safety requirements.

-In our free software Simplifier Manager you can select function blocks for E-stop, Push Buttons, safety devices and outputs for your machines.

-The I/O:s can be selected in the Software Simplifier Manager as Inputs, Outputs or as a combination of input and output at the same time.

-Connected I/O to cables and M12 contacts can be selected in the software as inputs, outputs or a combination for safety devices and machines.

-An I/O can also be set as a fixed voltage output, same as power supply, in the software.

-The flexibility of the I/O allows different function for the same connection to a cable.

The same cable can then be used for different sensors as the function is selected in the Simplifier Manager.

Example of Safety Devices which can be connected to the I/O:s and be programmed in Simplifier Manager:

• Door sensors
• Door locking
• Light curtains
• Safety edges and Safety mats
• Two hand devices
• Bypassing combinations
• Laser Scanners
• Enabling and hold to run devices
• Interlocked doors and hatches Position control
• Reset Push Buttons with indication
• Start and stop Push Buttons E-stops

Double relay outputs are commonly used for E-stop and Safety stop for

• Industrial robots
• Other machinery which need to differ between different stops
• Machines which need to have potential free contacts

Internal function selections

USB-contact is standard on all units

Wireless programming, on-line and bus communication on 2,4 GHz

Relay outputs on output 15 and 16: 2 x NO which can be used in parallel or in serie